Videoline 204-RP

Test lane for cars and vans

Motorcycle » Brake Tester

Professional test lane PC based. Modular configuration to meet all requirements

Key features

Brake tester - Roller set:

  • Mechanics in compact or split flat design, galvanised and consequently, suitable for outdoor installation
  • Level rollers available with coating or, alternatively steel with exclusively SmoothGrip design
  • Roller sets are equipped with rust-proof feeler rolls
  • Measurement with wear-free strain-gauge type load cells
  • Electric automatic drive-off aid to facilitate driving off the rollers
  • Splash-proof motors 3.7 or 5 kW
  • 4WD mode (counter-rotation) with the possibility of the automatic detection
  • Dual direction testing: to drive on the rollers from both sides and test in both directions

Control unit RP-Box:

  • The RP box with integrated electronics is the technological core of the system
  • Latest technology for highest flexibility
  • Wireless communication with the display modules, which allows flexible and simple installation
  • Lockable main switch to be mounted externally
  • Radio remote control grant simple operation in any conditions

Display modules - Workstation:

  • Design, which recalls the legendary Snap-on tool storage
  • Uniformity with the aligner – same looking in the shops
  • Equipped with wheels, two of them with brakes
  • VESA monitor support
  • Integrated power supply module
  • Supplied with: control unit (PC), keyboard,  mouse, 27" TFT flat monitor, A4 ink jet printer
  • Possible use of portable controller device such as a tablet PC
  • Extended software package

Display modules - Virtual analogue:

  • Alternative to the workstation
  • Two versions: 32" and 42" TFT flat monitor
  • The display kit can be mounted on the wall or on the stand
  • Basic software package
  • Version for outdoor installation

Technical data

Max. drive over weight per axle: 4000 kg
Measuring range: 0 – 8000 N
Max. brake force: 6000 N (with 2 x 3,7 kW motors) 7000 N (with 2 x 5 kW motors)
Test weight per axle according ISO 21069 (70% braking efficiency): 1750 kg (with 2 x 3,7 kW motors) 2000 kg (with 2 x 5 kW motors)
Idling speed: 5,4 km/h (roller set compact design) 5,2 km/h (roller set split design)
Roller coefficient dry wet: > 0.7 / > 0.6
Motor power: 2 x 3,7 kW or 2 x 5 kW
Roller diameter: 216 mm
Roller length: 700 or 1000 mm
Test width: 800 – 2200 mm (compact design rollers 700 mm) 800 - 2800 mm (compact design rollers 1000 mm) variable (split design) for suspension and side slip tester refer to the corresponding section


Additional modules:

  • Suspension tester, Eusama principle, in compact design
  • Suspension tester, Theta principle, in compact design, with noise research module
  • Side-slip tester, 500 or 1000 mm long


  • Motor brake for preserving motor and gear during drive out of the roller set (only for 3,7 kW)
  • Soft-start module for reduce the electric current absorption during starting of the motors
  • Integrated axle load weighing system or installation kit for later retrofit of the weighing system
  • Swivel wall support or column for virtual analogue display
  • Heating system for virtual analogue display, version for outdoor installation
  • Pneumatic lifting device: raises the vehicle to ground level, driving in and off the rollers is considerably facilitated and hence especially advantageous for vehicles with sports chassis or small wheel diameters
  • Lifting device of the roller set (only for compact design with roller length 1000 mm) is the ideal solution to help in performing the right test on vehicles with twin axles
  • Pedal pressure transducers cable or radio version
  • Pit safety devices 3 or 5 points for split versions
  • Roller covers hinged outwards or plug-in
  • Adapter for testing 2 wheels motorcycles
  • Noise level module for suspension tester, Eusama principle
  • Wide range of build-in frames (to facilitate the preparation of foundation)


Compact design with rollers 700 mm long: the standard solution for cars and vans

Compact design with rollers 1000 mm long: the solution for for cars, vans, caravans and trailers with tandem axles

Split design with rollers 700 mm long: the solution to be mounted on the side of the pit

Split design with rollers 1000 mm long: due the variable test width, can be used to test, beside cars and vans, motorcycle, three wheeler, quads

All mentioned version are available with motors 2 x 3,7 kW (max brake force 6 kN) or 2 x 5 kW (max brake force 7 kN)


Cartec - Videoline 204-RP (EN)
Videoline 204-RP
File size : 403.84 Kb

Certifications & Networking

Certifications: Germany, UK, Italy, Poland, Romania, Bulgaria, Slovenia, Serbia, Bosnia, Macedonia

Networking: ASA Network - ASA Livestream, MCTCNet2