Videoline 204-RP

Videoline 204-RP

Test lane for cars and vans

Applications:
Light duty » Brake Tester & Test Lane
Motorcycle » Brake Tester

Professional test lane PC based. Modular configuration to meet all requirements

Key features
Versions
Options
Technical Data
Certifications & Networking
Media
Ask for information

Key features

Roller set:

  • Mechanics in compact flat design, hot dip galvanised, suitable for outdoor installation
  • Equipped with rust-proof feeler rolls
  • Level rollers
  • 4t drive-over weight (axle)
  • Roller length 700 mm, with Composite coating
  • Splash-proof motors 3.7kW
  • Electric automatic drive-off aid to facilitate driving off the rollers
  • 4WD mode (counter-rotation)
  • Dual direction testing: to drive on the rollers from both sides and test in both directions

RP Box:

  • The RP box with integrated electronics is the technological core of the system
  • Wireless communication with the workstation, which allows flexible and simple installation
  • Lockable main switch integrated
  • Radio remote control grants simple operation in any conditions

Workstation:

  • Design, which recalls the legendary Snap-on tool storage
  • Equipped with wheels, two of them with brakes
  • VESA monitor support
  • Integrated power supply module
  • Supplied with: control unit (PC), keyboard, mouse, 27” TFT flat monitor, A4 ink jet printer
  • Possible use of portable controller device such as a tablet PC
  • Extended software package

OPTIONS:

  • Axle load weighing unit
  • Radio pedal pressure transducer PK 2.0
  • Radio transmission. In contrary to infrared transmission, there are no malfunctions because of external influences like sunlight, persons or objects standing in the way. The operation is customer-friendly, and independent of where the transmitter is standing.


Obligatory for Germany:
LAN cable prolongation for ASA Livestream

Technical data

Max. drive over weight per axle: 4000 kg
Measuring range: 0 – 8000 N
Max. brake force: 6000 N (with 2 x 3,7 kW motors) 7000 N (with 2 x 5 kW motors)
Test weight per axle according ISO 21069 (70% braking efficiency): 1750 kg (with 2 x 3,7 kW motors) 2000 kg (with 2 x 5 kW motors)
Idling speed: 5,4 km/h (roller set compact design) 5,2 km/h (roller set split design)
Roller coefficient dry wet: > 0.7 / > 0.6
Motor power: 2 x 3,7 kW or 2 x 5 kW
Roller diameter: 216 mm
Roller length: 700 or 1000 mm
Test width: 800 – 2200 mm (compact design rollers 700 mm) 800 - 2800 mm (compact design rollers 1000 mm) variable (split design) for suspension and side slip tester refer to the corresponding section

Options

Additional modules:

  • Suspension tester, Eusama principle, in compact design
  • Suspension tester, Theta principle, in compact design, with noise research module
  • Side-slip tester, 500 or 1000 mm long

Options:

  • Motor brake for preserving motor and gear during drive out of the roller set (only for 3,7 kW)
  • Soft-start module for reduce the electric current absorption during starting of the motors
  • Integrated axle load weighing system or installation kit for later retrofit of the weighing system
  • Swivel wall support or column for virtual analogue display
  • Heating system for virtual analogue display, version for outdoor installation
  • Pneumatic lifting device: raises the vehicle to ground level, driving in and off the rollers is considerably facilitated and hence especially advantageous for vehicles with sports chassis or small wheel diameters
  • Lifting device of the roller set (only for compact design with roller length 1000 mm) is the ideal solution to help in performing the right test on vehicles with twin axles
  • Pedal pressure transducers cable or radio version
  • Pit safety devices 3 or 5 points for split versions
  • Roller covers hinged outwards or plug-in
  • Adapter for testing 2 wheels motorcycles
  • Noise level module for suspension tester, Eusama principle
  • Wide range of build-in frames (to facilitate the preparation of foundation)

Versions

Compact design with rollers 700 mm long: the standard solution for cars and vans

Compact design with rollers 1000 mm long: the solution for for cars, vans, caravans and trailers with tandem axles

Split design with rollers 700 mm long: the solution to be mounted on the side of the pit

Split design with rollers 1000 mm long: due the variable test width, can be used to test, beside cars and vans, motorcycle, three wheeler, quads

All mentioned version are available with motors 2 x 3,7 kW (max brake force 6 kN) or 2 x 5 kW (max brake force 7 kN)

Media

Cartec - Videoline 204-RP (EN)
File size : 1,511.95 Kb
Download
Videoline 204-RP
Download

Certifications & Networking

Certifications: Germany, UK, Italy, Poland, Romania, Bulgaria, Slovenia, Serbia, Bosnia, Macedonia

Networking: ASA Network - ASA Livestream, MCTCNet2